I'm thinking about fixing my original Kangol magnetic static seat belts soon in my MK2, the photo attached shows the fixings components that I have found which have been stored away for years.
Am I correct in thinking that the first set on the left (chrome finished bolts 1 1/4" x 7/16" with wavy washers & stepped spacers) fit into the top of the door posts, the middle set (polished steel bolts 1 1/4" x 7/16" with wavy washers & stepped spacers) fit into the door cill upstand & the set on the right
(polished steel bolts 1" x 7/16" bolts with wavy washers & spacers) fit into the side of the central floor tunnel?
Also there are two alloy spacers, outside diameter 3/4", hole diameter 7/16" & 3/16" thick, are these part of the group of fixings as well?
Kangol seat belts fixings
-
Cammsjb
- 998 Cooper
- Posts: 408
- Joined: Sat Sep 12, 2015 7:40 pm
- Location: Lancashire
- Been thanked: 1 time
Kangol seat belts fixings
You do not have the required permissions to view the files attached to this post.
-
Terence
- 850 Super
- Posts: 233
- Joined: Tue May 26, 2020 1:36 am
Re: Kangol seat belts fixings
Instructions
You do not have the required permissions to view the files attached to this post.