Original crimped Driveshaft boot clips
-
rolesyboy
- 1275 Cooper S
- Posts: 2352
- Joined: Fri Jun 25, 2010 10:57 am
- Location: Colchester, Essex
- Has thanked: 6 times
- Been thanked: 6 times
Original crimped Driveshaft boot clips
Does anybody know where I can obtain the original crimped Driveshaft boot clips and perhaps the tool that you use to crimp them together? Didn't like to use zip ties. I used lock wire last time but would prefer to use the original alloy/zinc looking things if I can lay hands on them. Cheers. Mark
Rolesyboy
-
Ronnie
- 1275 Cooper S
- Posts: 1266
- Joined: Fri Jun 25, 2010 5:37 pm
- Location: N/E England Where the SAND is GOLDEN and the sea is always COLD!!
- Has thanked: 6 times
- Been thanked: 19 times
Re: Original crimped Driveshaft boot clips
Your choice >> http://www.ebay.co.uk/sch/i.html?_from= ... boot+clips If you have'nt got the proper pincers you can use a set of side cutters.rolesyboy wrote:Does anybody know where I can obtain the original crimped Driveshaft boot clips and perhaps the tool that you use to crimp them together? Didn't like to use zip ties. I used lock wire last time but would prefer to use the original alloy/zinc looking things if I can lay hands on them. Cheers. Mark
This is the correct tool>>> http://www.ebay.co.uk/itm/Hose-Clip-Pli ... 5d30bb4025
-
970s
- 998 Cooper
- Posts: 323
- Joined: Sat Jun 26, 2010 3:59 am
- Location: Hong Kong SAR
Re: Original crimped Driveshaft boot clips
See my photo in Project : GPH1C replica Asia thread!
Shows the special crimp tool!
AL