Battery Cable Routing

Post any technical questions or queries here.
rogerotto66s
998 Cooper
Posts: 603
Joined: Mon Sep 10, 2018 8:29 am
Location: Collegeville,PA USA

Battery Cable Routing

Post by rogerotto66s »

I have read several posts and am still confused - over subframe vs under subframe.

So.. specifically for my WET 1966 “S” how is the cable routed on the rear end.

Pictures please.
Roger Williams
1966 Austin Cooper S - LHD - Wet - Personal Export
User avatar
TECH396
998 Cooper
Posts: 430
Joined: Sun Feb 16, 2020 9:12 pm
Location: Vancouver Island BC Canada
Been thanked: 1 time

Re: Battery Cable Routing

Post by TECH396 »

Early 68 car here, showing the two brackets holding the cable to the subframe.
You do not have the required permissions to view the files attached to this post.
Paul H.
rogerotto66s
998 Cooper
Posts: 603
Joined: Mon Sep 10, 2018 8:29 am
Location: Collegeville,PA USA

Re: Battery Cable Routing

Post by rogerotto66s »

Thanks for the picture TECH396.

Anyone care to make a case for the cable going over the subframe?
Roger Williams
1966 Austin Cooper S - LHD - Wet - Personal Export
User avatar
winabbey
998 Cooper
Posts: 652
Joined: Thu Apr 18, 2013 1:45 am
Location: Melbourne, Australia
Has thanked: 5 times
Been thanked: 14 times

Re: Battery Cable Routing

Post by winabbey »

rogerotto66s wrote: Mon May 31, 2021 3:28 amAnyone care to make a case for the cable going over the subframe?
Easier to remove and replace rear subframe.
User avatar
Spider
1275 Cooper S
Posts: 4851
Joined: Mon May 07, 2012 6:10 am
Location: Big Red, Australia
Has thanked: 186 times
Been thanked: 65 times

Re: Battery Cable Routing

Post by Spider »

I'm not sure how they did them in the UK, but all (most ?) of our locally produced Minis, they fitted all the pipework and the battery cable before both subframes went in.

As Winabbey mentioned, it's one thing less to sort when removing a subframe + it's a little less exposed at a particularly vulnerable point.
User avatar
Peter Laidler
1275 Cooper S
Posts: 6398
Joined: Sat Jul 15, 2017 5:35 pm
Location: Abingdon Oxfordshire
Has thanked: 139 times
Been thanked: 118 times

Re: Battery Cable Routing

Post by Peter Laidler »

Just a minute chaps........... Surely it makes it MORE difficult to remove the sub-frame with the batt cable running UNDER the sub frame (as shown). You can't just pull the cable through the hole in the boot floor because it's got the all-in-one cast battery lug on and won't go through the hole. Or is this a case of me missing something?

I say that Rogers car is correct and that the cable is there for two reasons. A) to prevent the cable chaffing against anything on a convoluted route around and over the top of the sub frame and B) to sod the sub-frame replacer about while he's setting about changing the rusty rear sub-frame. Because as it is, he's got to pull the cable out from the front. That's OK if it's got a floor button start, but not a barrel of laughs if you've got to undo the cable from the key-start solenoid.

Anyway, that's the total sum of my Monday thinking!!!!!
User avatar
winabbey
998 Cooper
Posts: 652
Joined: Thu Apr 18, 2013 1:45 am
Location: Melbourne, Australia
Has thanked: 5 times
Been thanked: 14 times

Re: Battery Cable Routing

Post by winabbey »

Peter Laidler wrote: Mon May 31, 2021 9:22 am Just a minute chaps........... Surely it makes it MORE difficult to remove the sub-frame with the batt cable running UNDER the sub frame (as shown). You can't just pull the cable through the hole in the boot floor because it's got the all-in-one cast battery lug on and won't go through the hole. Or is this a case of me missing something?

I say that Rogers car is correct and that the cable is there for two reasons. A) to prevent the cable chaffing against anything on a convoluted route around and over the top of the sub frame and B) to sod the sub-frame replacer about while he's setting about changing the rusty rear sub-frame. Because as it is, he's got to pull the cable out from the front. That's OK if it's got a floor button start, but not a barrel of laughs if you've got to undo the cable from the key-start solenoid.

Anyway, that's the total sum of my Monday thinking!!!!!
Peter - mate, you need to clean your spectacles. Read the question and answers again. ;)
User avatar
Peter Laidler
1275 Cooper S
Posts: 6398
Joined: Sat Jul 15, 2017 5:35 pm
Location: Abingdon Oxfordshire
Has thanked: 139 times
Been thanked: 118 times

Re: Battery Cable Routing

Post by Peter Laidler »

Got that Doug and have cleaned my goggles. I got the impression that the Q wasn't about the BEST positioning but more about WHY. Anyway, that's my Monday contribution to the Forum. But in any case, I blame everything that goes wrong in my life to the Australian influences in it!!

Have a great weekend
AndyPen
1275 Cooper S
Posts: 3920
Joined: Mon Jul 24, 2017 5:55 pm
Location: South Wales
Has thanked: 18 times
Been thanked: 50 times

Re: Battery Cable Routing

Post by AndyPen »

I have a car with that routing as well. Isn't there another discussion on this? Pre Hydro I suspect they were on the top of the subframe. I certain recall my annoyance replacing a subframe, and ended up cutting the battery lug off. Easy enough to fit a modern one back on ;-)
User avatar
winabbey
998 Cooper
Posts: 652
Joined: Thu Apr 18, 2013 1:45 am
Location: Melbourne, Australia
Has thanked: 5 times
Been thanked: 14 times

Re: Battery Cable Routing

Post by winabbey »

Peter Laidler wrote: Mon May 31, 2021 10:56 am Got that Doug and have cleaned my goggles. I got the impression that the Q wasn't about the BEST positioning but more about WHY. Anyway, that's my Monday contribution to the Forum. But in any case, I blame everything that goes wrong in my life to the Australian influences in it!!

Have a great weekend
Sorry, Peter. On reflection I'm guessing you were talking about the original question, not the later one, so my flippant comment (meant to be lighthearted) was misdirected. I apologise. :oops:
User avatar
Peter Laidler
1275 Cooper S
Posts: 6398
Joined: Sat Jul 15, 2017 5:35 pm
Location: Abingdon Oxfordshire
Has thanked: 139 times
Been thanked: 118 times

Re: Battery Cable Routing

Post by Peter Laidler »

Hey Doug, no ofence even remotely taken. Regards, Pete the Pom
User avatar
winabbey
998 Cooper
Posts: 652
Joined: Thu Apr 18, 2013 1:45 am
Location: Melbourne, Australia
Has thanked: 5 times
Been thanked: 14 times

Re: Battery Cable Routing

Post by winabbey »

The perils of social media. Wouldn't have happened had we been discussing this face to face.
rogerotto66s
998 Cooper
Posts: 603
Joined: Mon Sep 10, 2018 8:29 am
Location: Collegeville,PA USA

Re: Battery Cable Routing

Post by rogerotto66s »

Thanks for the excellent discussion.

So... what is the verdict for my wet 1966 Austin Cooper S - OVER or UNDER.

I just installed the rear subframe and placed the cable OVER.
I have not installed the front subframe yet so it is not too late to pull the cable back and go UNDER.

Thanks all.
Roger Williams
1966 Austin Cooper S - LHD - Wet - Personal Export
User avatar
Peter Laidler
1275 Cooper S
Posts: 6398
Joined: Sat Jul 15, 2017 5:35 pm
Location: Abingdon Oxfordshire
Has thanked: 139 times
Been thanked: 118 times

Re: Battery Cable Routing

Post by Peter Laidler »

SEEMS like it's UNDER for originality but OVER for convenience next time you change the sub frame!
User avatar
TECH396
998 Cooper
Posts: 430
Joined: Sun Feb 16, 2020 9:12 pm
Location: Vancouver Island BC Canada
Been thanked: 1 time

Re: Battery Cable Routing

Post by TECH396 »

rogerotto66s wrote: Mon May 31, 2021 3:28 am Thanks for the picture TECH396.

Anyone care to make a case for the cable going over the subframe?
The photo I shared earlier is from a low mile unrestored car.
Personally I can't see going over the subframe to be a viable option. The battery cable runs in a steel channel from the shifter area, then to the heelboard. If it were to get routed over the subframe, It would need to take a very sharp bend at the heelboard, and then be subject to chafing between heelboard and subframe.
In my opinion, the Battery cable was installed after the rear subframe was fitted. Starting at the battery first because the "Hat type" bonded terminal was too large to go through the Boot floor hole if fitted last. The solenoid end was a much smaller eyelet, and was also routed under the subframe at the front. I can only speak for the North american Cars, as they're the only ones I've serviced. I can dig up some more images if it helps.
1071bob
998 Cooper
Posts: 593
Joined: Thu Jun 24, 2010 8:51 pm
Location: west country
Been thanked: 52 times

Re: Battery Cable Routing

Post by 1071bob »

This was discussed a few years ago, the early dry cars up to '64 had a shorter cable channel which allowed the battery cable to go over the subframe alongside the brake line. When the hydro was introduced the cable channel went the full length of the tunnel and the cable went underneath the subframe and was attached with the two P clips.
More info and pictures here.
http://mk1-forum.net/viewtopic.php?f=3& ... le#p174650
You do not have the required permissions to view the files attached to this post.
rogerotto66s
998 Cooper
Posts: 603
Joined: Mon Sep 10, 2018 8:29 am
Location: Collegeville,PA USA

Re: Battery Cable Routing

Post by rogerotto66s »

Seems the terms OVER and UNDER are now adding to the confusion!

My cable channel runs the full length of the tunnel.

I will install the subframe first and then route the battery cable.
This should then be similar to the first picture posted by TECH396.

It would be nice if the cable hole in the boot were large enough to accommodate the cable terminal!

Thanks all.
Roger Williams
1966 Austin Cooper S - LHD - Wet - Personal Export
AndyPen
1275 Cooper S
Posts: 3920
Joined: Mon Jul 24, 2017 5:55 pm
Location: South Wales
Has thanked: 18 times
Been thanked: 50 times

Re: Battery Cable Routing

Post by AndyPen »

The extra tabs that Bob points out are an extra giveaway I recall :-)
rogerotto66s
998 Cooper
Posts: 603
Joined: Mon Sep 10, 2018 8:29 am
Location: Collegeville,PA USA

Re: Battery Cable Routing

Post by rogerotto66s »

Here is my cable routed properly for my 66’”S”.

A99ECA73-9094-4E59-81C2-E46E03BF2C5D.jpeg
You do not have the required permissions to view the files attached to this post.
Roger Williams
1966 Austin Cooper S - LHD - Wet - Personal Export
rogerotto66s
998 Cooper
Posts: 603
Joined: Mon Sep 10, 2018 8:29 am
Location: Collegeville,PA USA

Re: Battery Cable Routing

Post by rogerotto66s »

Just had to drop my subframe.
Guess what?

I had to pull the battery cable from the front and out of the cable channel and remove the two clips holding it to the subframe.
Would have been easier if I could have pulled the cable out of the battery box and removed the two subframe clips.
Has anyone increased the size of the hole in the bottom of the battery box and used a larger grommet?
Are there any downsides to this?
Roger Williams
1966 Austin Cooper S - LHD - Wet - Personal Export
Post Reply