The 3 syncro box shows two gears listed 22A377 and 22G202. The visual difference is one has a groove around the center of the gears and the other does not. Question is, are they interchangeable or is one specifically for A gears and the other for B gears? Other than the mentioned groove, is there a difference in the pitch angles etc.
Chris Miller
3 Syncro reverse gears
-
bwaminispeed
- 998 Cooper
- Posts: 609
- Joined: Sat Aug 21, 2010 4:05 am
Re: 3 Syncro reverse gears
The grooved one is the later one....
Tooth profile is different, non grooved one has noticeably fatter teeth.....
Tooth profile is different, non grooved one has noticeably fatter teeth.....
-
Andrew1967
- 1275 Cooper S
- Posts: 7927
- Joined: Thu Jun 24, 2010 6:35 pm
- Location: Usually in my garage on the east coast of Norfolk, UK
- Been thanked: 8 times
Re: 3 Syncro reverse gears
377 is for A gears
202 is for B gears
.. and unfortunately are not interchangeable
202 is for B gears
.. and unfortunately are not interchangeable
-
251 ENG
- 1275 Cooper S
- Posts: 1670
- Joined: Sun Jun 27, 2010 5:26 pm
- Location: Warwickshire
- Been thanked: 6 times
Re: 3 Syncro reverse gears
They will fit but this is undoubtedly another reason for 3 syncro box,s with knackered first gears .
First gear , reverse gear and laygear must all match
The very early reverse gears have a rounded lead on the teeth not a chamfer and a different part number .
May be another one of those 59 mini things
First gear , reverse gear and laygear must all match
The very early reverse gears have a rounded lead on the teeth not a chamfer and a different part number .
May be another one of those 59 mini things