Does anyone have a template for the correct early RH inner wing doubler/stiffener section that goes on the inside of this panel?
My old pattern was destroyed and I thought I would check to see if anyone has made a drawing of it.
Also, are these the areas that need to be fixed to turn this into a mk1 panel? Seems like a lot of work!
RH inner wing doubler
-
Gary Schulz
- 1275 Cooper S
- Posts: 1042
- Joined: Wed Dec 10, 2014 7:06 pm
- Location: Chicago, IL
- Has thanked: 16 times
- Been thanked: 3 times
RH inner wing doubler
You do not have the required permissions to view the files attached to this post.
-
redrobbo
- 850 Super
- Posts: 168
- Joined: Sun Jan 20, 2013 2:23 pm
- Location: Leamington Spa
-
P3sk3tt
- Posts: 5
- Joined: Tue Jun 11, 2013 10:16 pm
Re: RH inner wing doubler
M-machine sell the correct stiffener as my heritage inner wings came with the later type.
The lumps and bumps circled are incorrect if fitting to a mark one. I removed them on mine also.
The lumps and bumps circled are incorrect if fitting to a mark one. I removed them on mine also.
-
Gary Schulz
- 1275 Cooper S
- Posts: 1042
- Joined: Wed Dec 10, 2014 7:06 pm
- Location: Chicago, IL
- Has thanked: 16 times
- Been thanked: 3 times
Re: RH inner wing doubler
I wound up making up a paper template so I ordered some steel in the correct thickness and will make it myself. Now, should I buy a spot welder??
You do not have the required permissions to view the files attached to this post.
-
mini_surfari
- 1275 Cooper S
- Posts: 773
- Joined: Fri Jun 25, 2010 10:26 am
- Location: South West
- Has thanked: 1 time
- Been thanked: 4 times
