bwaminispeed wrote: ↑Sun Nov 22, 2020 7:28 pm They are long enough, they should be able to go back up through the grommet.......Seems silly to design the wiring harness that way though.....
Don't know about the clips.....
Thanks for hanging in there with me!
Very much appreciated.
I re-routed the dip switch wires under the dash and pedal box. I will continue to check on the need for a clip.
I also pulled the red and red/white wires back up into the speedo housing and out one of the holes. The wires were long enough to connect them to the switch and attach it to the binnacle.
Next step is to test the switches, horn, turn signals, etc.
Thanks to all who contributed to my post.