Anybody know where this little part goes ?

[65MK1S]

Any help would be appreciated, thanks\
in advance goes on a 65 Cooper S
Kent

part1.jpg

part2.jpg

part3.jpg

[GraemeC]

Throttle pedal stop.
Would’ve originally have a rubber sleeve on one end

[65MK1S]

Thanks GraemeC, I normally take pic's of everything coming
apart, missed this one

[rogerotto66s]

I also have this part in my bit bucket and wondered what it was.
I found these pictures which will help me.

throttle_pedal_1.jpg

throttle_pedal_2.jpg

what is the purpose of the rubber sleeve?

[Time Bandit]

what is the purpose of the rubber sleeve?

Probably just to act as a cushion when the pedal hits the stop.

[Terence]

.....

[roymck]

Just check you can still get full throttle after fitting one of these .

[timmy201]

what is the purpose of the rubber sleeve?

Probably just to act as a cushion when the pedal hits the stop.

I think it would also stop the cable falling off the end of the pedal?

[Time Bandit]

what is the purpose of the rubber sleeve?

Probably just to act as a cushion when the pedal hits the stop.

I think it would also stop the cable falling off the end of the pedal?

Yup it would too, probably more like it when I think about it as the stop already has a rubber bit on to act as a cushion. Is it an original thing, as the cable clips I've seen were a metal thing, maybe somebody has put it on if they'd lost the original clip?

[winabbey]

This is what a New Old Stock one looks like. John Smidt (Mini King) acquired a supply when BMC / Leyland Australia closed down. He still has a few I think.

21A349_NOS.jpg

This is what that NOS one looks like when fitted (to my Cooper S).

21A349 Accelerator Pedal Stop New v2.jpg

[AndyPen]

This is what a New Old Stock one looks like. John Smidt (Mini King) acquired a supply when BMC / Leyland Australia closed down. He still has a few I think.

He shut down bout this time last year I thought - with a home sale?? Are you still in touch with him by any chance? My S lost this years ago.

[winabbey]

John is alive and well and working privately after a disappointing departure from the BMI owned Mini Kingdom Online. I speak to him most days.

He is selling a lot of his parts on eBay at the moment.

https://www.ebay.com.au/sch/the_mini_ki ... 7675.l2562

[AndyPen]

Thanks - I will message him

[65MK1S]

Thanks for all the help to identify this part
Before

part2.jpg

and after

part4.jpg