Master cylinder push rod

General Chat with an emphasis on BMC Minis & Other iconic cars of the 1960's.
Post Reply
360gts
1275 Cooper S
Posts: 3071
Joined: Sat May 24, 2014 7:12 am
Has thanked: 1 time
Been thanked: 51 times

Master cylinder push rod

Post by 360gts »

Anyone found a source for the brake/clutch master cylinder push rods?

We know they are made as new MC's come with them....
Top
croc7
Basic 850
Posts: 77
Joined: Wed Dec 31, 2014 5:10 pm
Location: Tacoma, WA USA

Re: Master cylinder push rod

Post by croc7 »

You might try Moss Motors, PN# 181-690. For reference, I measured a pushrod from a new clutch master cylinder to have an overall length of 2.90”.
Top
360gts
1275 Cooper S
Posts: 3071
Joined: Sat May 24, 2014 7:12 am
Has thanked: 1 time
Been thanked: 51 times

Re: Master cylinder push rod

Post by 360gts »

croc7 wrote: ↑Mon Nov 02, 2020 5:20 am You might try Moss Motors, PN# 181-690. For reference, I measured a pushrod from a new clutch master cylinder to have an overall length of 2.90”.
Thanks...have tried Moss many times....they have been on back order for ages....
Checked a few rods here...they are all around this size.
Top
Dr S
1275 Cooper S
Posts: 976
Joined: Wed May 28, 2014 1:06 pm
Location: Lakeland

Re: Master cylinder push rod

Post by Dr S »

What do you need? I’ve got a couple of spare old bean cans?
I've got a 69 Mini with a 1046, Cooper Head and a four on the floor.
Top
Post Reply

Return to “General Chat”