Hi all,
Could anyone do me a massive favour please and take a quick measurement from b-pillar to b-pillar across the car as low down as you can (just above the tunnel would be great)
I’m installing a new doorstep and even though it’s braced across, I just want to double check the rear quarter hasn’t moved. I’ve got the door on and it sticks out a little at the bottom corner.
Thank you in advance
Jay.
Measurement favour please
-
- Posts: 20
- Joined: Sun Jun 14, 2020 5:49 pm
- Location: Oxfordshire
-
- 1275 Cooper S
- Posts: 1501
- Joined: Mon May 11, 2015 4:16 pm
- Location: Scotland
Re: Measurement favour please
Hi Jay,
Just done this for another mini fanatic with the same issues. 1265mm. That’s at top of tunnel height between the inner sills where the seat belt mounting point would be if yours had one.
Another measurement is at the top of the rear parcel bins between the B pillars 1245mm
Hope this helps.
D
Just done this for another mini fanatic with the same issues. 1265mm. That’s at top of tunnel height between the inner sills where the seat belt mounting point would be if yours had one.
Another measurement is at the top of the rear parcel bins between the B pillars 1245mm
Hope this helps.
D
-
- Posts: 20
- Joined: Sun Jun 14, 2020 5:49 pm
- Location: Oxfordshire