I have a slight dilemma!
I have got a 998 mk1 Cooper, for which I have purchased and received a cooper wiring loom. The issue I have is I have a servo!
Options
As it left the factory as a standard 998 and had a servo fitted later in life, do I install the control box in the standard Cooper location
Or
Install the control box in the Cooper s location by extending the control box wiring, correct for a Cooper S but it’s a Cooper.
Any advise welcome (before is go mad!!!)
Thanks
Servo and control box
-
colonel mustard
- 998 Cooper
- Posts: 572
- Joined: Wed Jan 16, 2019 2:57 pm
- Location: Derbyshire, UK
- Contact:
-
colonel mustard
- 998 Cooper
- Posts: 572
- Joined: Wed Jan 16, 2019 2:57 pm
- Location: Derbyshire, UK
- Contact:
-
LarryLebel
- 998 Cooper
- Posts: 549
- Joined: Sat Feb 15, 2014 12:02 am
- Location: North Vancouver BC
-
Andrew1967
- 1275 Cooper S
- Posts: 7927
- Joined: Thu Jun 24, 2010 6:35 pm
- Location: Usually in my garage on the east coast of Norfolk, UK
- Been thanked: 8 times
Re: Servo and control box
I put the regulator in the S position and made up a small extension harness from the loom to the regulator. Doesn’t really notice once all the wires are tucked away.
-
colonel mustard
- 998 Cooper
- Posts: 572
- Joined: Wed Jan 16, 2019 2:57 pm
- Location: Derbyshire, UK
- Contact: