Post any technical questions or queries here.
999 ORX
998 Cooper
Posts: 371Joined: Fri Feb 11, 2011 8:10 am
Post
by 999 ORX Wed Jun 03, 2020 4:55 pm
Howdo,
I bought some wheels for a mini and it appears the pcd is bigger than that of a mini and not actually for a mini
!? The pcd looks to be around 110ish (measured roughly with a tap measure) any ideas what they are actually off? I think they are more than likely Italian in origin..
dklawson
1275 Cooper S
Posts: 1166Joined: Tue Feb 18, 2014 4:44 amLocation: Durham, NC USABeen thanked: 1 time
Contact:
Post
by dklawson Wed Jun 03, 2020 5:53 pm
The pattern is in inches, 4"x4 with 3/8" diameter studs as stock. 110mm would be way too big to fit.
Doug L.
roymck
998 Cooper
Posts: 452Joined: Tue May 27, 2014 7:19 pmLocation: Dorking , Surrey
Post
by roymck Wed Jun 03, 2020 6:07 pm
Are they 10 inch wheels ?
8662 FN Austin Mini Yes I know it’s not original
GraemeC
1275 Cooper S
Posts: 2288Joined: Thu Jun 24, 2010 1:05 pmLocation: Hiding From The Dog... NW EngHas thanked: 3 times Been thanked: 7 times
Post
by GraemeC Wed Jun 03, 2020 6:46 pm
110mm pcd is a very unusual size,
Oneball
1275 Cooper S
Posts: 932Joined: Mon May 06, 2019 12:33 pmLocation: WorcesterHas thanked: 10 times Been thanked: 5 times
Post
by Oneball Wed Jun 03, 2020 9:12 pm
Lots of trailer wheels are 10 inch
surfblue63
Post
by surfblue63 Wed Jun 03, 2020 9:16 pm
999 ORX
998 Cooper
Posts: 371Joined: Fri Feb 11, 2011 8:10 am
Post
by 999 ORX Wed Jun 03, 2020 9:26 pm
Hi,
You do not have the required permissions to view the files attached to this post.
GraemeC
1275 Cooper S
Posts: 2288Joined: Thu Jun 24, 2010 1:05 pmLocation: Hiding From The Dog... NW EngHas thanked: 3 times Been thanked: 7 times
Post
by GraemeC Wed Jun 03, 2020 9:53 pm
Honda N600 / Z600
999 ORX
998 Cooper
Posts: 371Joined: Fri Feb 11, 2011 8:10 am
Post
by 999 ORX Wed Jun 03, 2020 10:30 pm
Yes I think your right Graeme
GraemeC wrote: ↑ Wed Jun 03, 2020 9:53 pm
Honda N600 / Z600
Balls, do you think it's worth while altering them or just sell on to a Honda person?
LuisM
998 Cooper
Posts: 587Joined: Tue May 27, 2014 3:47 pmLocation: Porto, PortugalHas thanked: 1 time Been thanked: 4 times
Post
by LuisM Wed Jun 03, 2020 11:21 pm
Honda N600 / Z600
Graeme is correct, i own one of these little jap toys and they use 110x4 PCD...
Aftermarket alloy wheels are hard to find.... i would sell them.
Cheers
Luis
You do not have the required permissions to view the files attached to this post.
surfblue63
Post
by surfblue63 Wed Jun 03, 2020 11:24 pm
GraemeC wrote: ↑ Wed Jun 03, 2020 9:53 pm
Honda N600 / Z600
I 've going through all the European stuff in my head and all I could come up with 10" wheels was Gogomobile. Forgot those little Hondas. My Uncle had an orange one back in the 1970s.
LuisM
998 Cooper
Posts: 587Joined: Tue May 27, 2014 3:47 pmLocation: Porto, PortugalHas thanked: 1 time Been thanked: 4 times
Post
by LuisM Wed Jun 03, 2020 11:26 pm
Oh, BTW i have a mini 5x10 Melber set for sale if you are interested.
!? The pcd looks to be around 110ish (measured roughly with a tap measure) any ideas what they are actually off? I think they are more than likely Italian in origin..
