Any body out there know where i can get new handbrake selector bushes that fit into the radius arm, BMC No LBS 0507, or anybody that manufacture them.
Regards Domo.
Radius Arm handbrake selector bushes
-
Domo
- Posts: 9
- Joined: Sun Apr 15, 2018 11:34 am
- Location: Bicester Oxfordshire
-
Daz1968
- 1275 Cooper S
- Posts: 1440
- Joined: Sat Dec 27, 2014 1:41 pm
- Location: Oldbury west midlands
Re: Radius Arm handbrake selector bushes
Is it dry or hydro, maybe worth contacting somerford mini centre as I have found them very good for hard to find parts, they seem to get a lot of parts remanufactured. Failing that they are probably easy to make on a lathe.
-
Domo
- Posts: 9
- Joined: Sun Apr 15, 2018 11:34 am
- Location: Bicester Oxfordshire
-
Hipwell
- 1275 Cooper S
- Posts: 1380
- Joined: Sat Aug 08, 2015 3:02 pm
- Location: Solihull, UK
- Has thanked: 3 times
- Been thanked: 3 times
Re: Radius Arm handbrake selector bushes
They will be a standard size bush, pop one out and measure it.
If I recall, Hydro were 5/16x7/16x3/8", closest stock is 1/2" long.
If I recall, Hydro were 5/16x7/16x3/8", closest stock is 1/2" long.