small bore mk1 mini master cyls ??
-
Ronnie
- 1275 Cooper S
- Posts: 1266
- Joined: Fri Jun 25, 2010 5:37 pm
- Location: N/E England Where the SAND is GOLDEN and the sea is always COLD!!
- Has thanked: 6 times
- Been thanked: 19 times
Re: small bore mk1 mini master cyls ??
Hi! You will develop a higher hydraulic pressure for a given pedal pressure, but you will lose wheel cylinder travel!
-
Michael7
- Basic 850
- Posts: 62
- Joined: Mon Aug 02, 2010 11:26 pm
- Location: Virginia and California USA
- Been thanked: 2 times
Re: small bore mk1 mini master cyls ??
The 998 Cooper had .625" bore master cylinder, which is about right for your 16mm measurement. It was Unipart GMC105 or AP/Lockheed 4222-921.
Repair kit was Rover 18G8157 and AP/Lockheed SSB795 and later LK11240, but please confirm the last number with your supplier before ordering.
Repair kit was Rover 18G8157 and AP/Lockheed SSB795 and later LK11240, but please confirm the last number with your supplier before ordering.