Lower dash rail skay patern

[Charlynsane]

Hello guys,

I have to retrim my lower dash rail

does anyone have a pattern of this?

http://www.minisport.com/mcr41-vinyl-co ... black.html

I already have the material, but it's the first time I will do this!

Thank you guys!

[100BUR]

I recently covered the top and bottom dash rails of my Elf, using the vinyl from Newton Commercial.

Similar to Minisports but I had to cut the templates first.

The method I used was to buy a big bag of pegs from Wilkos , I clipped the vinyl to the dash first to see how it would lie and used a hoppy knife to cut the holes for the vents/switch panel first.

I then used Evo Stick and applied to the dash rail only I then positioned and clipped with the pegs the vinyl as I worked from the drivers side to passengers I used a sponge to flatten down/position.

This was my first attempt

[Charlynsane]

Thank you for your help

I will try to use the same way to wrap my lower dash,

The most difficult will be to bend the vynil on the round corner..

[minimans]

Thank you for your help

I will try to use the same way to wrap my lower dash,

The most difficult will be to bend the vynil on the round corner..

Use some heat to warm the material the wifes hair dryer for instance...............

[Charlynsane]

My wife will kill me lol

But I will of course warm it! lool

An d I use a neoprene spray, very efficient