Mini in the MIRA wind tunnel

Post any technical questions or queries here.
Post Reply
User avatar
mab01uk
1275 Cooper S
Posts: 8579
Joined: Thu Jun 24, 2010 7:08 pm
Location: S.E. England
Has thanked: 262 times
Been thanked: 231 times

Mini in the MIRA wind tunnel

Post by mab01uk »

Spotted this link on TMF and thought I would post it here for interest:-
http://www.carbonweezel.co.uk/testing/testing_mini.html

CARBON WEEZEL GOES TO MIRA
Summer 2009
"Carbon Weezel together with Racecar Engineering magazine took a hillclimb Mini into the MIRA wind tunnel for a hectic but very revealing half-day session to test products and to provide data for a short series of articles in its monthly Aerobytes column, written by former hillclimber Simon McBeath.
The car was provided by Graham and Neal Masters from Southsea, Portsmouth, who are already highly competitive in their class at Gurston.
Here is a brief outline of what was found."
Produced in association with:
Racecar Engineering Magazine
Simon McBeath

Testing catagories

Airdam
Splitter
Diffuser
Bonnet
Sealing engine bay
Headlamp intake scoops
Headlamp domes
Running boards
Rear spoiler
De-seaming
User avatar
mab01uk
1275 Cooper S
Posts: 8579
Joined: Thu Jun 24, 2010 7:08 pm
Location: S.E. England
Has thanked: 262 times
Been thanked: 231 times

Re: Mini in the MIRA wind tunnel

Post by mab01uk »

From further back in the archives.....'Mini Aerodynamics' article and diagrams below by Peter Davney
Mini Aerodynamics - MTN 1982
viewtopic.php?f=5&t=10097
Post Reply