Page 1 of 1
Product Placement (Downton)
Posted: Thu Apr 24, 2014 10:00 am
by mk1
I received these images from Tim Harber this morning.
Taken from the AA book of the car.
Wonderful bit of product placement don't you think.
Re: Product Placement (Downton)
Posted: Thu Apr 24, 2014 10:15 am
by 36inter
I like.
Pete
Re: Product Placement (Downton)
Posted: Thu Apr 24, 2014 10:25 am
by rich@minispares.com
must have been a secret trick of Downtons to use a 998 head gasket on a 1275 engine
Re: Product Placement (Downton)
Posted: Thu Apr 24, 2014 11:00 am
by Craig
Rich , isnt that a small bore head in the top picture ??
295 head possibly??
Craig
Re: Product Placement (Downton)
Posted: Thu Apr 24, 2014 11:16 am
by mk1
The Guru has feet of clay!
It looks like a 998 kit to me too.
M
Re: Product Placement (Downton)
Posted: Thu Apr 24, 2014 11:18 am
by rich@minispares.com
its a 1275 engine in the car though....................
Re: Product Placement (Downton)
Posted: Thu Apr 24, 2014 12:45 pm
by mk1
Curses!
One day to
WILL be wrong
Re: Product Placement (Downton)
Posted: Fri Apr 25, 2014 7:48 am
by Old English White
The car pictures are of a BMC 1100/1300 aren't they?
Wonderful pictures by the way
Re: Product Placement (Downton)
Posted: Fri Apr 25, 2014 2:12 pm
by mk1
They certainly are.
The 1100 "Motorway" kit was the best seller Downton ever had.
Re: Product Placement (Downton)
Posted: Fri Apr 25, 2014 4:53 pm
by AndyB72
How long is that exhaust!
Re: Product Placement (Downton)
Posted: Fri Apr 25, 2014 5:23 pm
by tjw89
Just a quick question, is it a sticker or a normal Downton badge on the twin carb box ? It looks just slightly bigger than normal to me.
Tim
Re: Product Placement (Downton)
Posted: Sun Apr 27, 2014 10:35 am
by UHR850
Thanks for the pictures
