Page 1 of 1
Brake and clutch pedal bush fitting
Posted: Mon Jan 13, 2014 7:50 pm
by Lakeland997
I've fitted new bushes (Minispares 2A3034) to my pedals but the shaft won't fit through any more.
Does anyone know if they normally need to be reamed to size?
Re: Brake and clutch pedal bush fitting
Posted: Tue Jan 14, 2014 8:53 am
by mk1
Nearly all bushes should be reamed before assembly.
I suspect (but don't know) that you would need a 9/16th's reamer.
M
Re: Brake and clutch pedal bush fitting
Posted: Tue Jan 14, 2014 10:03 am
by Smiffy
mk1 wrote:Nearly all bushes should be reamed before assembly.
After fitting to take them back to the correct size.
Re: Brake and clutch pedal bush fitting
Posted: Tue Jan 14, 2014 12:02 pm
by mk1
I meant re assembly of the component, not the bush.
Of course the bush can only be reamed once it is fitted.
M