Page 1 of 1
Engine stand bracket
Posted: Tue Nov 12, 2013 9:43 pm
by rolesyboy
Has anybody got a design for an adapter plate for a Sealey engine stand to suit an A Series. I would like to have one made up as a permanent fixture as i am only likely to rebuild Mini engines. Thanks in advance. Mark
Re: Engine stand bracket
Posted: Tue Nov 12, 2013 10:36 pm
by Smiffy
Theres one some one was selling on ebay
Re: Engine stand bracket
Posted: Tue Nov 12, 2013 10:37 pm
by Smiffy
Another idea
Re: Engine stand bracket
Posted: Tue Nov 12, 2013 11:27 pm
by swifty
Mark I made up what your after a few years ago . Ain't got a clue were it is but il have a good look tommorow . All the best . KEN .
Re: Engine stand bracket
Posted: Sat Nov 16, 2013 9:30 pm
by monkeyjim
I recently bought a Sealey stand a then purchased a adaptor from Jon Betts who contributes in Mini Mag in the staff car pages .
He fabricates all sorts of bits . Google search Jb fabrication facebook , it wil come up at top of list.
The adaptor is well made and does the job btw.
Dave
Re: Engine stand bracket
Posted: Sun Nov 17, 2013 3:54 pm
by ianh1968
Some of the blocks that I have seen have a threaded
hole right in the middle at the back of the block, 7/16" UNF...
Could this be what it was for
