Page 1 of 1

Alloy Rocker Cover

Posted: Sat Sep 25, 2010 6:41 pm
by kwjcoopermk2
Hi

Together with a 1275 GT and a lot of parts i purchased yesterday there was this nice old alloy rocker cover.

Is there anybody in here who knows the manufacture of this ?

I believe that the manfactures name once stod in the square at the top of the cover, but sometime in the past it has been machined of :cry:

Best Regards Kristian

Re: Alloy Rocker Cover

Posted: Sun Sep 26, 2010 11:16 am
by Craig
I would say its an HRG . I think Mark has these on his web site. Seen a few here in canada as I own 3.

Craig

Re: Alloy Rocker Cover

Posted: Sun Sep 26, 2010 11:22 am
by Craig

Re: Alloy Rocker Cover

Posted: Sun Sep 26, 2010 11:24 am
by Craig

Re: Alloy Rocker Cover

Posted: Sun Sep 26, 2010 11:55 am
by UHR850
I do not think this is an HRG it must have been an LANDAR !!!

http://excoboard.com/forums/13326/user/ ... 312967.jpg

Re: Alloy Rocker Cover

Posted: Mon Sep 27, 2010 10:16 am
by mk1
The rocker cover above is DEFINATELY a modified HRG cover. A very nice find too!

Re: Alloy Rocker Cover

Posted: Mon Sep 27, 2010 10:52 am
by AndyB72
Alexander?

Re: Alloy Rocker Cover

Posted: Mon Sep 27, 2010 3:52 pm
by AndyB72
...

Re: Alloy Rocker Cover

Posted: Mon Sep 27, 2010 4:09 pm
by mk1
Andy,

The Alexander covers & the HRG ones were both cast by HRG.

Re: Alloy Rocker Cover

Posted: Mon Sep 27, 2010 8:01 pm
by UHR850
Yes Marc you are right, I am wrong. Thanks for this lesson in rocker covers.

Re: Alloy Rocker Cover

Posted: Mon Sep 27, 2010 8:04 pm
by kwjcoopermk2
Hi

Thanks for all the answers. Yes a very nice find :D . There was a lot of exciting parts with the car such as a genuine right hand tank, genuine new wide super mini fins, a mini fin rocker cover, 2 new brake regulator valves etc. The car it self is very rough and fitted with a horrible toilet seat in the roof and a weber box.

Best Regards Kristian

Re: Alloy Rocker Cover

Posted: Tue Sep 28, 2010 8:44 am
by mk1
UHR,

I'm never interested in who's right or wrong, the whole idea of the forum ios an honest exchange of views & opinions.

Your input is always very welcome.

Re: Alloy Rocker Cover

Posted: Tue Sep 28, 2010 8:03 pm
by UHR850
Marc.

I know what you mean but it was well meant, I do learn a lot about the classic MINI
on this forum. Specialy the special parts and accesoires of the '60.

Thanks every one.

Kees
UHR850
Downton-House

Re: Alloy Rocker Cover

Posted: Tue Sep 28, 2010 11:36 pm
by coopertim
Definately Alexander. My first MK1, an 850 super deluxe ECT 254D was Alexander converted from new in Bourne 1966 and had exactly the same rocker cover and twin Strombergs fitted. It had no heat shields and the petrol used to evaporate when the engine was hot so you had to start it from under the bonnet on the solenoid with the throttle held open!!!! Happy Days.


Tim.

Re: Alloy Rocker Cover

Posted: Wed Sep 29, 2010 8:55 am
by mk1
Those Alexander covers are as common as muck nowadays :lol:

Re: Alloy Rocker Cover

Posted: Wed Sep 29, 2010 11:52 am
by madaboutcherry

Re: Alloy Rocker Cover

Posted: Wed Sep 29, 2010 9:43 pm
by Tulka

Re: Alloy Rocker Cover

Posted: Thu Sep 30, 2010 8:03 pm
by tjw89
I am after a Alexander converted HRG rocker cover. Could you convert a normal HRG or not ? As I have a few of them.