Page 1 of 1
Mk.1 wiper motor attachment?
Posted: Mon Feb 18, 2013 1:55 am
by Benny
Because I bought my '61 in pieces, there are some details that I've never seen in person. The one that came up today was the attachment of the wiper motor.....the studs that fasten the motor to the bulkhead appear to be #10's, but the holes in the bulkhead are about 5/16".
What fills the gap....is it sort of a sleeved, rubber bushing?
Re: Mk.1 wiper motor attachment?
Posted: Mon Feb 18, 2013 3:19 am
by 66S
Yep, 3 x rubber bushings and 3 each of two types of washers (6 in total).
Al
Re: Mk.1 wiper motor attachment?
Posted: Mon Feb 18, 2013 5:32 am
by Benny
Are the bushings still available from somewhere like MiniSpares? I wasn't able to find them.
Re: Mk.1 wiper motor attachment?
Posted: Mon Feb 18, 2013 8:36 am
by steve1071
I got mine from Tim at Minimail
Re: Mk.1 wiper motor attachment?
Posted: Wed Feb 20, 2013 1:04 am
by 66S
Benny, three washers go on the studs, the wiper passes through the rubber bushes and then three smaller ID washers fit on the studs. The nuts tighten and the bushes are compressed to a crush predetermined by the step in the stud.
Al
Re: Mk.1 wiper motor attachment?
Posted: Wed Feb 20, 2013 3:06 am
by jay weinstein
call the guys at 7enterprises. you'll have them monday