Page 1 of 1
Mk1 Body Number Plate, Repair or Replace ?
Posted: Thu Jul 26, 2012 4:14 am
by jl46
Hello all experts,
I need help replacing or repairing my Mk 1 body number. The number on the plate spot welded to the bonnet locking platform.
My painter
inadvertently sanded and painted over my original stamped body number that I had
very carefully transferred to a new front panel, and asked him to mask off ! I can no longer see any of the numbers.
I would like to reproduce or repair this number plate to as close as possible the original.
How can I reproduce the stamped numbers so they look as original ? Is there a club member
who knows of someone who could make up this small number plate for me ? Is there anything special about the punch
that was used to make the numbers on the original plate at the factory ?
Jim
Re: Mk1 Body Number Plate, Repair or Replace ?
Posted: Thu Jul 26, 2012 9:50 am
by 814CWE
make your own-most body numbers nseem lost from the old days when the front panels were replaced
if you cant get a similar sized punch..get a friendly engraver to engrave it in in the font you desire!!
Re: Mk1 Body Number Plate, Repair or Replace ?
Posted: Thu Jul 26, 2012 10:00 am
by JC T ONE
have you cleaned off the paint yet ?
are you sure that he sanded so much / hard, that the numbers are gone ?
they might sit under the paint.
Re: Mk1 Body Number Plate, Repair or Replace ?
Posted: Thu Jul 26, 2012 10:04 am
by 814CWE
i remade one for one of mine coz the plate had been sanded so many times it had no stamping left on it,,
saying that the one on my 63 is really deeply punched and even 2k paint over it,,its still legible
the one on my 62 smoke grey however,even one light coat of cellulose rendered it totally unreadable,,the stamping was that shallow .....
suppose the factory stamping method was "just stamp it"
depends how heavy handed the operator was with his hammer!!!!!!!!
Re: Mk1 Body Number Plate, Repair or Replace ?
Posted: Thu Jul 26, 2012 5:05 pm
by mk1
Personally I wouldn't worry. But to "restore" it as close to original as possible, engraving seems the most sensible option.
M
Re: Mk1 Body Number Plate, Repair or Replace ?
Posted: Sun Jul 29, 2012 12:37 pm
by Frogeye61
Aren't these all reverse stamped?
Like this:
Re: Mk1 Body Number Plate, Repair or Replace ?
Posted: Sun Jul 29, 2012 6:24 pm
by Mini4Ever
No they are not... Earlier ones are stamped in.
Re: Mk1 Body Number Plate, Repair or Replace ?
Posted: Thu Aug 02, 2012 1:07 pm
by 814CWE
Mini4Ever wrote:No they are not... Earlier ones are stamped in.
agreed tho ive seen some late mk1 austins with reverse stamped plates
Re: Mk1 Body Number Plate, Repair or Replace ?
Posted: Fri Aug 03, 2012 3:03 am
by JC T ONE
brook shaw wrote:Mini4Ever wrote:No they are not... Earlier ones are stamped in.
agreed tho ive seen some late mk1 austins with reverse stamped plates
Bet there was a cross over, as there also has been MK II Cooper,s with brocade interior.
I have a 1967 MK I and it has the thick stamped plate, but I dont know how late it is ?
Re: Mk1 Body Number Plate, Repair or Replace ?
Posted: Thu Aug 16, 2012 9:09 am
by 814CWE
our march 67 morris has a NON reverse stamped body number,,as well as engraved type chassis plate