Page 1 of 1

Engine stalls...

Posted: Tue Jul 03, 2012 6:58 pm
by Pete
Bit odd this but I'm posting this on behalf of a mate.....

Ok, he's got a pokey 1275 S lump with split Webers and every time he goes out in it the bloody thing stalls when coming to a stop at lights/in traffic etc once warmed up and will not restart for a few minutes. It always starts fine from cold. I borrowed it once a couple of years ago and it did this on me, restarted after a five minutes.

I thought fuel, either it fouls the plugs when idling hot (is that possible ??) or more likely it's boiling the fuel once hot ?

I know ..'how long's a piece of string'.. but any suggestions welcome.

Re: Engine stalls...

Posted: Tue Jul 03, 2012 8:28 pm
by COOPERCO
Hi Pete,

Does it need choke/throttle pumping to get it going from cold? Sounds like it could be lean when hot....maybe :?: Have you had your string calibrated recently.

Mike.

Re: Engine stalls...

Posted: Tue Jul 03, 2012 10:36 pm
by gr4h4m
Im guessing it's too rich at idle.... So you are flooding when coming to a stop. A wide band would tell you this for sure. Then you need to find out why...

Re: Engine stalls...

Posted: Tue Jul 03, 2012 11:48 pm
by bmcman.ie
weak mixture! ;)

Re: Engine stalls...

Posted: Wed Jul 04, 2012 7:03 am
by 251 ENG
Needs a good rolling road tune by somebody the understands split webers :D

Re: Engine stalls...

Posted: Thu Jul 05, 2012 9:32 pm
by Pete
Sounds like a plan Simon. :)

Re: Engine stalls...

Posted: Fri Jul 06, 2012 7:49 am
by 251 ENG
01926 815681 ask for Rod or Colin :D