Page 1 of 1
Mk3 S - daily driver project
Posted: Sun Jun 17, 2012 7:33 pm
by pad4
Re: Mk3 S - daily driver project
Posted: Sun Jun 17, 2012 7:53 pm
by Pandora
I agree about black cars, but they do show up any ripples - that looks good though. I'd definately paint the roof black.
Mk3 elf doors? I like the door chrome against the black
The wheels are mingin' though - I'd put standard (silver / grey) steels on it.
Al
Re: Mk3 S - daily driver project
Posted: Tue Jun 19, 2012 6:17 pm
by 999 ORX
Once you go black, you never go back.. Ha
Re: Mk3 S - daily driver project
Posted: Sun Jun 24, 2012 5:59 pm
by pad4
put the right style wheels on today - alloy S rims with dunlop racing tyres, took the clubman front bumper off and put a proper mini one back on, looks tons better now
interior next job on the cards
Re: Mk3 S - daily driver project
Posted: Sun Jun 24, 2012 7:58 pm
by JC T ONE
Thats a very nice S
If you are going to use it in the rain ? I would recommend innerwings, to prevent rust.
They make a HUGE difference, when it comes to help keeping a Mini rustfree.
Side/bonus effect, is that they reduce the road noise
PS , love the reclining handle
Re: Mk3 S - daily driver project
Posted: Sun Jun 24, 2012 9:00 pm
by InimiaD
Looks far better with proper (10") wheels on it.
Makes a vast difference.
Re: Mk3 S - daily driver project
Posted: Sun Jun 24, 2012 10:18 pm
by rolesyboy
Jens, who supplies the innerwings you refer to? Cheers. Mark
Re: Mk3 S - daily driver project
Posted: Sun Jun 24, 2012 11:05 pm
by Pete
It's already got them on. The bodywork (it's the original shell) on that car is superb and will make a great little classic daily once fettled and the trim sorted...and it's really got some poke !
Re: Mk3 S - daily driver project
Posted: Sun Jun 24, 2012 11:15 pm
by JC T ONE
rolesyboy wrote:Jens, who supplies the innerwings you refer to? Cheers. Mark
I dont have the last reciept here, but I think its this place
http://fyunce.dk/
I know there are some in UK too, my friend once bought a set in plastic, from a company called Camlo.
The Danish ones, are made of alloy, with a rubber seal, on each side.
They completely seal off the whole innerwing, but are open in the front & rear, so air goes thrue = no condensation.
I seem to remember the price was 60 pounds, for a set, and they make them for all classic Mini,s
Re: Mk3 S - daily driver project
Posted: Mon Jun 25, 2012 8:11 am
by guru_1071
pad4 wrote:Always had a think about black minis - couldn't resist this one and I'm going to make it into a nice daily driver , very solid shell and punchy motor , just needs some tlc, bit of paint here and there, interior sorting and a set of alloys
Might paint the roof black as well
Pad
im liking the seat adjuster!!!!
slighty tatty black cooper s's with a white roof are a strong look!!!!!
Re: Mk3 S - daily driver project
Posted: Mon Jun 25, 2012 9:07 am
by pad4
genwine MOLE grip as well !!!
original and correct for the period
Re: Mk3 S - daily driver project
Posted: Wed Jul 04, 2012 8:33 am
by tedmcedd
Very nnice indeed!
gonna have a black interior too? you'll have to be careful where you park it in the dark!
Re: Mk3 S - daily driver project
Posted: Fri Jul 20, 2012 10:52 pm
by pad4
Sorted the interior out now, gone is the nasty mini 25 and in with proper seats
before
After
just need to give them a good spit n polish
Re: Mk3 S - daily driver project
Posted: Sat Jul 21, 2012 9:22 am
by guru_1071
Re: Mk3 S - daily driver project
Posted: Sat Jul 21, 2012 10:32 am
by pad4
im keeping the velour seats for shows only
any way you need help ! youre a closet weirdo as well
say no more !!
Re: Mk3 S - daily driver project
Posted: Sat Jul 21, 2012 10:54 am
by guru_1071