Page 1 of 1
mk1 sealed rear quarter light rubbers
Posted: Tue Feb 07, 2012 4:34 pm
by 814CWE
does anybody make the rubber seal for the mk1 basic model rear quarterlight,, (non opening)
??
and if so are they any good?
is it off the roll or is sombody making a one piece one now?
Re: mk1 sealed rear quarter light rubbers
Posted: Tue Feb 07, 2012 4:46 pm
by Dean
i got mine from phoenix which are at most shows, they do them bagged up, pre cut and ends joined together, or you can by it off the reel,
i did here that the stuff off the reel is slightly better quality
http://phoenixtrim.co.uk/default.aspx
Re: mk1 sealed rear quarter light rubbers
Posted: Tue Feb 07, 2012 5:19 pm
by 814CWE
ahh i remember those guys,,do u have a contact number or website
Re: mk1 sealed rear quarter light rubbers
Posted: Tue Feb 07, 2012 5:22 pm
by coop12g295
01884 849294 speak to Kaye or Nigel and mention me Ian the screen fitter
Re: mk1 sealed rear quarter light rubbers
Posted: Tue Feb 07, 2012 5:25 pm
by Dean
there was a link on my first post
not fitted them yet, there been in the loft in a black bag for the last 3 years!!!!!!!!
Re: mk1 sealed rear quarter light rubbers
Posted: Wed Feb 08, 2012 9:53 pm
by 66S
Does anybody do quality seals for opening windows? The ones I have were from Minispares some time ago and the lip is much heavier then the original rubber. The chrome frame does not readily fit inside and I have to go around from the inside with a putty knife and push the seal lip out. Consequently, I seldom open the rear windows.
Regards
Al
Re: mk1 sealed rear quarter light rubbers
Posted: Sat Feb 11, 2012 8:20 am
by SteveG
hi Al.
I just bought some from minispares for my 62. They have gone on a treat, but i've not fitted the windows yet. I'll let you know how I go.