Page 1 of 1
S Rocker Cover with breather pipe inclined
Posted: Sun Mar 23, 2025 2:00 pm
by moita
Hi,
As per title, I do need a rocker cover with inclined vent pipe and cut outs for the S head studs.
Many thanks,
NM
Re: S Rocker Cover with breather pipe inclined
Posted: Sun Mar 23, 2025 3:58 pm
by AndyPen
Hiya, I did one of mine by putting a blowtorch at the base of the breather pipe and twisted it using a slightly smaller length of pipe in the aperture when it got hot. I'm sure I learned that on here
Re: S Rocker Cover with breather pipe inclined
Posted: Sun Mar 23, 2025 8:46 pm
by Andrew1967
That's right Andy, warm it up, twist the pipe and then file cut outs for the head stud/bolt
Re: S Rocker Cover with breather pipe inclined
Posted: Mon Mar 24, 2025 9:59 am
by moita
You are right
! And cheaper!!!
