Page 1 of 1
73mm pistons
Posted: Fri Jan 10, 2025 6:15 pm
by 360gts
Anyone have a source for 73mm pistons. (not 73.5)...not having much luck finding them....
Cheers
D
Re: 73mm pistons
Posted: Fri Jan 10, 2025 6:19 pm
by whistler
Try Keith Calver at CalverST.
Re: 73mm pistons
Posted: Fri Jan 10, 2025 6:34 pm
by wantafaster1
+1 for Calver st
Re: 73mm pistons
Posted: Fri Jan 10, 2025 7:34 pm
by 360gts
Have sent him an email
Cheers and thanks.
D
Re: 73mm pistons
Posted: Fri Jan 10, 2025 8:09 pm
by Herbert
Hi Dermott,
looking at my Mahle piston catalogue, these are the only 73 mm pistons they made.
Hope it helps !
R
20250110_195126.jpg
Re: 73mm pistons
Posted: Sat Jan 11, 2025 9:18 pm
by steve1071
Had some decent ones off Keith Calver a few years back, think they were made in Oz.
Re: 73mm pistons
Posted: Sat Jan 11, 2025 9:44 pm
by 360gts
steve1071 wrote: ↑Sat Jan 11, 2025 9:18 pm
Had some decent ones off Keith Calver a few years back, think they were made in Oz.
Yep, I had a set from a guy in Oz...Aus minis...unfortunately, he seems to have disappeared.
Re: 73mm pistons
Posted: Sun Jan 12, 2025 1:17 am
by timmy201
Re: 73mm pistons
Posted: Sun Jan 12, 2025 8:52 am
by steve1071
Re: 73mm pistons
Posted: Sun Jan 12, 2025 6:03 pm
by wantafaster1
In case anyone wants to know, the Calver st pistons have a slightly skinnier ring than an omega, and although die cast went quite happily to 8000 on the rev counter.
Re: 73mm pistons
Posted: Mon Jan 13, 2025 5:49 am
by Spider
steve1071 wrote: ↑Sat Jan 11, 2025 9:18 pm
Had some decent ones off Keith Calver a few years back, think they were made in Oz.
Taiwan
https://www.rightway.com.tw/index.php?o ... 29&index=1