3 Synchro Gearbox builds
Posted: Sat Dec 07, 2024 2:14 pm
Floating this early in readiness for Blyton 2025 to see if there is any interest in the following 3 synchro gearbox builds:
22A1522 Remote case (New old Stock)
12A1288 Remote case
22G68 Magic wand.
Can be fitted with standard ratio helical gears or new straight cut gears and a final drive ratio of choice(from 2.7 through to 4.1) along with cross joint, pot or hardy spicer diff outputs.
Standard diff cage or x-pin.
New bearings, steel baulks, seals, gaskets, layshaft and centre oil pick up.
I can add price to the advert for your required casing and specification.
The used casings (12A1288 and 22G68) will be solvent cleaned and can be vapour blasted if required.
Can also supply transfer case, gasket and idler gear shimmed ready to fit.
Regards Jason
22A1522 Remote case (New old Stock)
12A1288 Remote case
22G68 Magic wand.
Can be fitted with standard ratio helical gears or new straight cut gears and a final drive ratio of choice(from 2.7 through to 4.1) along with cross joint, pot or hardy spicer diff outputs.
Standard diff cage or x-pin.
New bearings, steel baulks, seals, gaskets, layshaft and centre oil pick up.
I can add price to the advert for your required casing and specification.
The used casings (12A1288 and 22G68) will be solvent cleaned and can be vapour blasted if required.
Can also supply transfer case, gasket and idler gear shimmed ready to fit.
Regards Jason