Single Tank Boot Board wanted

Looking for that elusive part, shout about it here.
Posts are automatically deleted after 6 months.
Forum rules
1) The advertising of or soliciting for VIN tags, log books or any other vehicle identification documentation without it's associated vehicle is expressly forbidden.

2) If I consider any postings in this section to violate either the spirit or word of this simple request I reserve the right to delete any posts without prior warning or explanation.

3) Please try to avoid starting discussions or commenting on peoples Wanted listings. It clutters the section up & makes it difficult to see what people are actually asking for. Please feel free to start discussions in the appropriate section.

4) Please always include your LOCATION

Rev 2.0 (10.09.2024)
Post Reply
User avatar
Exminiman
1275 Cooper S
Posts: 2849
Joined: Tue Jan 17, 2017 8:59 am
Location: Berkshire UK
Has thanked: 10 times
Been thanked: 4 times

Single Tank Boot Board wanted

Post by Exminiman »

As description, ideally in grey, not bothered if its a bit knackered or stained, ideally would be nice though

post or collect.

Please PM me

Thanks
User avatar
mab01uk
1275 Cooper S
Posts: 8148
Joined: Thu Jun 24, 2010 7:08 pm
Location: S.E. England
Has thanked: 25 times
Been thanked: 24 times

Re: Single Tank Boot Board wanted

Post by mab01uk »

If all else fails Minispares do them but covered in black carpet for the single 5.5 gallon & 7.5 gallon tanks plus twin tanks. Although the 5.5 tank board is currently listed as out of stock.
BOOT BOARD BLACK CARPETED 5.5 GALLON TANK:-
https://www.minispares.com/product/Clas ... oards.aspx
User avatar
Exminiman
1275 Cooper S
Posts: 2849
Joined: Tue Jan 17, 2017 8:59 am
Location: Berkshire UK
Has thanked: 10 times
Been thanked: 4 times

Re: Single Tank Boot Board wanted

Post by Exminiman »

Still looking :D
Rubber Sprung
850 Super
Posts: 212
Joined: Sun Feb 17, 2013 7:03 pm
Location: Somerset

Re: Single Tank Boot Board wanted

Post by Rubber Sprung »

I used an old boot board from a scrap Elf/Hornet its the right carpet and vinyl edging ,cut it down to the correct size and use the original bits to recover .
Post Reply