Page 1 of 1
side window hinge screws
Posted: Wed Feb 14, 2024 7:54 am
by roger mcnab
hi are the screws for the side windows machine screws or self tappers as when i got this car all the screws and bolts etc were just a big lump of rust so i have no reference point
cheers roger mc nab
Re: side window hinge screws
Posted: Wed Feb 14, 2024 10:16 am
by MiNiKiN
This is what my Amazon wishlist says:
machine screw, 6/32 x 1/4" Flat Head Screw
Waiting for others to disagree....
Re: side window hinge screws
Posted: Wed Feb 14, 2024 11:13 am
by gs.davies
Re: side window hinge screws
Posted: Wed Feb 14, 2024 11:46 am
by Peter Laidler
What's even BETTER is that they're STAINLESS. And if stainless is good enough for Catmint, then it's good enough for the stainless doubting rebuilders (see separate thread close by.....) on the forum.
Thanks once again Catmint
Re: side window hinge screws
Posted: Wed Feb 14, 2024 9:42 pm
by AndyPen
I used Catmints with copper ease
Re: side window hinge screws
Posted: Fri Feb 16, 2024 6:44 am
by Bob46320
Blimey - Screw by nature and screw by price ! The original screws had domed heads, not countersunk ?
Re: side window hinge screws
Posted: Fri Feb 16, 2024 6:48 am
by Bob46320
Re: side window hinge screws
Posted: Fri Feb 16, 2024 7:52 am
by Catmint
Bob46320 wrote: ↑Fri Feb 16, 2024 6:44 am
Blimey - Screw by nature and screw by price ! The original screws had domed heads, not countersunk ?
Flat head CSK in our origional 62. Domed head can stop the hinges from closing properly. Domed were used in the latch at the back.
Your choice what you want to pay, considering the quantity what I sell it is not a problem to most people and to be honest there is sweet FA in it for me
Re: side window hinge screws
Posted: Fri Feb 16, 2024 10:48 am
by Peter Laidler
I echo Catmints comments