A friendly international forum for people interested in the tuning & modification of classic BMC vehicles
https://mk1-forum.net/
Excellent!Stopped-again wrote: ↑Sat Feb 18, 2023 10:25 pm Hiya Terry, all looms should have a connection for sidelights, it’ll be a red wire that terminates near the front right hand wing along with the blue/red and blue/white wires for the dip and main beams.
So I dug into this a bit today, and all I can find are these two white/black wires that I can’t identify.Stopped-again wrote: ↑Sat Feb 18, 2023 10:25 pm Hiya Terry, all looms should have a connection for sidelights, it’ll be a red wire that terminates near the front right hand wing along with the blue/red and blue/white wires for the dip and main beams.
Thanks! I dug a little further and found a single red wire that comes on with the park lights. It was buried in the bundle of lighting wires.iain1967s wrote: ↑Sun Apr 02, 2023 10:27 pm That’s the ignition circuit wiring I think. The white wire is the 12v ignition switch feed to the coil and the right black/white wire goes to the other terminal of the coil. The left black/white connects to the points fly-lead from the distributor.
The bundle of lighting wires you’re looking for are tucked up under the slam panel, usually pretty close to the bonnet release or vertical support.