Page 1 of 1
Handbrake question
Posted: Thu Oct 20, 2011 12:04 am
by Henry
The little guide metl guide plates that attach just behind the handbrake to the tunnel of the body, do they go on the inside or underside of the car? I remember taking them off from the inside but drawings in the parts manual seem to show they mount on the underside. thanks!
Re: Handbrake question
Posted: Thu Oct 20, 2011 1:52 am
by JC T ONE
Is there not suppose to be one on each side of the tunnel ?
So they form an angled tube, the cable (s) runs in.
4 years since I last assembled a Mini
sorry -
Re: Handbrake question
Posted: Thu Oct 20, 2011 3:00 am
by Vegard
Both as far as I can recall. 4 per car.
Re: Handbrake question
Posted: Thu Oct 20, 2011 10:19 am
by Henry
Interesting, I agree 4 would kinda make sense, all the parts manuals indicate only 2 are required per car?
Re: Handbrake question
Posted: Thu Oct 20, 2011 11:31 am
by SMOKE GREY
4 Top ones in car face forward obviously, and the ones underneath face rear to make a 'tube' guide. Don't forget to use the gaskets top and bottom, minispares do them, otherwise it will p*ss in
Re: Handbrake question
Posted: Thu Oct 20, 2011 8:46 pm
by Steve A
I've only got ones on top m i missing the ones on the underside then?