mk1-forum.net

Posted: **Wed Dec 23, 2020 1:58 pm**

Need your help!
I bought a set of MINISPARES EVOLUTION LIGHTWEIGHT PISTONS with an offset bowl - now, after I have handed them to my engine re-builder to mate them with the con-rods, I noticed I should have told him which way round to orientate the offset. <
Trouble is - I don't know and cannot find any info on that matter.
TIA

Posted: **Wed Dec 23, 2020 2:31 pm**

Bowl towards the spark plugs I'd imagine, like the omegas.

Posted: **Wed Dec 23, 2020 2:41 pm**

In hindsight that makes a lot of sense, yes

Posted: **Wed Dec 23, 2020 8:15 pm**

Okay
First time i see them...

Why are they offset?

Posted: **Wed Dec 23, 2020 9:01 pm**

Fanfaniracing wrote: ↑Wed Dec 23, 2020 8:15 pm Okay
First time i see them...

Why are they offset?

I think they're offset to improve alignment between the combustion chamber and the piston dish. Whether it makes any difference, who knows.
Pretty sure the omegas I bought in the 90's had a central dish.

Posted: **Sat Dec 26, 2020 11:28 pm**

The swifttune MS pistons are the same.

mk1-forum.net

MS Pistons with offset bowl - orientation of bowl offset?

MS Pistons with offset bowl - orientation of bowl offset?

Re: MS Pistons with offset bowl - orientation of bowl offset?

Re: MS Pistons with offset bowl - orientation of bowl offset?

Re: MS Pistons with offset bowl - orientation of bowl offset?

Re: MS Pistons with offset bowl - orientation of bowl offset?

Re: MS Pistons with offset bowl - orientation of bowl offset?