Page 1 of 1
Engine identification and Weber Jet recommendations
Posted: Sun Aug 30, 2020 8:34 pm
by Fanfaniracing
Hi
I have this engine where i don't really know from what car it comes from.
Maybe ADO16?
I would like to put a 40 DCOE Weber Carburetor on it and asking if maybe someone has some suggestions for the Jets and venturis?
The Engine is still stock and runs well on HS2's but i would like to try something...
Regards Fabian
85A72C3D-2288-4410-AC3D-C773F2DEDA55.jpeg
Re: Engine identification and Weber Jet recommendations
Posted: Sun Aug 30, 2020 8:47 pm
by imack
AD016 according to Guessworks engine no. decoder
Re: Engine identification and Weber Jet recommendations
Posted: Mon Aug 31, 2020 10:44 am
by timmy201
Vizard's book has 1275 + modified head + 40 DCOE:
Choke 35
Main Jet 145
Air Corrector 180
Emulsion F16
Pump Jet 45
Idle 50F2
Re: Engine identification and Weber Jet recommendations
Posted: Mon Aug 31, 2020 5:32 pm
by Fanfaniracing
Hej Timmy!
Thank you for Info.
In wich Book of the wizard did you get this? In the yellow one? so i overseen this...
will try tomorrow
Re: Engine identification and Weber Jet recommendations
Posted: Mon Aug 31, 2020 10:45 pm
by timmy201
Fanfaniracing wrote: ↑Mon Aug 31, 2020 5:32 pm
Hej Timmy!
Thank you for Info.
In wich Book of the wizard did you get this? In the yellow one? so i overseen this...
will try tomorrow
Yellow book, 3rd edition page 114
I’ve also got a really helpful one from Speedpro
https://www.amazon.com/Build-Power-Dell ... 1903706750
With those books and an AFR gauge you can get them tuned up to perfection
Re: Engine identification and Weber Jet recommendations
Posted: Wed Sep 02, 2020 11:45 am
by Fanfaniracing
Started the Engine very successfuly yesterday evening.
I like the nice sound of the Weber's