Page 1 of 1
Battery cable thickness
Posted: Mon Aug 24, 2020 6:58 pm
by harrymini
Would 25mm 170A cable be acceptable for the run underneath the car? The outer diameter is 10mm
The car is bored a little over 1275
Or should i go larger?
Thanks
Re: Battery cable thickness
Posted: Tue Aug 25, 2020 4:50 am
by Spider
16 sqmm is fine, but I run 25 and it eats it
Re: Battery cable thickness
Posted: Tue Aug 25, 2020 2:59 pm
by mk1
Ditto, I use 25mm welding cable. Much better than the factory stuff.
Not a recommendation, just an example.
https://www.amazon.co.uk/Langley-Copper ... ooghydr-21
Re: Battery cable thickness
Posted: Tue Aug 25, 2020 5:37 pm
by harrymini
Thanks mk1 and spider