Page 1 of 1
Fuel banjos where to buy?
Posted: Thu Jun 18, 2020 6:59 pm
by Dearg1275
I’ve been trying to source solderable banjos for Weber carbs. Ideally these should take 5/16 (8mm) pipe. Does anyone know a supplier?
D
Re: Fuel banjos where to buy?
Posted: Thu Jun 18, 2020 7:43 pm
by surfblue63
Fuel Union DCO/SP and 48 IDA, could that be what you need?
https://www.webcon.co.uk/shopdisplaypro ... uel+Unions
Re: Fuel banjos where to buy?
Posted: Thu Jun 18, 2020 8:17 pm
by Polarsilver
Remember we are going to get E10 in our Petrol & that stuff does not like Soft Solder ( so they say ?)
Probably best to use Silver Solder ?
Re: Fuel banjos where to buy?
Posted: Thu Jun 18, 2020 9:50 pm
by Hipwell
I have cut off the existing pipe and drilled down with a 5/16" drill and then silver soldered the copper pipe in, dozens lying around following aeroquip installs on race cars.
Re: Fuel banjos where to buy?
Posted: Fri Jun 19, 2020 9:10 am
by Dearg1275
Brilliant, didn’t s scroll down far enough. Too impatient. Thanks S. All thanks everyone else.
D