mk1-forum.net

Howdo,

I bought some wheels for a mini and it appears the pcd is bigger than that of a mini and not actually for a mini !? The pcd looks to be around 110ish (measured roughly with a tap measure) any ideas what they are actually off? I think they are more than likely Italian in origin..

The pattern is in inches, 4"x4 with 3/8" diameter studs as stock. 110mm would be way too big to fit.

Are they 10 inch wheels ?

110mm pcd is a very unusual size,
Ford is 108mm (on UK & Eurpoean cars at least) but obviously not 10" rims

Lots of trailer wheels are 10 inch

If they're 12s could be from a Daihatsu

https://www.wheel-size.com/pcd/4x110/

It also a popular size for quad bikes

https://www.roadkillcustoms.com/wheel-b ... 33-inches/


Loads of makes have a 4x108 pcd

https://www.wheel-size.com/pcd/4x108/

Click here for all sizes

https://www.wheel-size.com/pcd/

Hi,

Yes 10 by 5 inch melber wheels.. I'm really a bit miffed, I was looking forward to seeing them in a mini

Honda N600 / Z600

Yes I think your right Graeme

GraemeC wrote: ↑Wed Jun 03, 2020 9:53 pm Honda N600 / Z600

Balls, do you think it's worth while altering them or just sell on to a Honda person?

Honda N600 / Z600

Graeme is correct, i own one of these little jap toys and they use 110x4 PCD...

Aftermarket alloy wheels are hard to find.... i would sell them.

Cheers
Luis

GraemeC wrote: ↑Wed Jun 03, 2020 9:53 pm Honda N600 / Z600

I 've going through all the European stuff in my head and all I could come up with 10" wheels was Gogomobile. Forgot those little Hondas. My Uncle had an orange one back in the 1970s.

Oh, BTW i have a mini 5x10 Melber set for sale if you are interested.