Page 1 of 1
Radius Arm handbrake selector bushes
Posted: Tue Apr 21, 2020 7:43 pm
by Domo
Any body out there know where i can get new handbrake selector bushes that fit into the radius arm, BMC No LBS 0507, or anybody that manufacture them.
Regards Domo.
Re: Radius Arm handbrake selector bushes
Posted: Tue Apr 21, 2020 8:53 pm
by Daz1968
Is it dry or hydro, maybe worth contacting somerford mini centre as I have found them very good for hard to find parts, they seem to get a lot of parts remanufactured. Failing that they are probably easy to make on a lathe.
Re: Radius Arm handbrake selector bushes
Posted: Wed Apr 22, 2020 3:13 pm
by Domo
Ok thanks i'll give somerford a call
Re: Radius Arm handbrake selector bushes
Posted: Wed Apr 22, 2020 3:30 pm
by Hipwell
They will be a standard size bush, pop one out and measure it.
If I recall, Hydro were 5/16x7/16x3/8", closest stock is 1/2" long.