Page 1 of 1
Distributor drive housing dimensions
Posted: Sun Mar 29, 2020 9:54 pm
by iain1967s
Hi. Does this look to be correct for a mini?
Seems about 1/4 inch too long when fitted to my S block.
Total length approx 2.166” [2-1/8” nominal]
Re: Distributor drive housing dimensions
Posted: Sun Mar 29, 2020 10:02 pm
by Spider
Just looking at it, it appears too long.
It also doesn't have the groove for the O Ring.
Might be an early one or for a different series of engine.
Re: Distributor drive housing dimensions
Posted: Sun Mar 29, 2020 10:11 pm
by Dearg1275
Early mini one (without ring) 2.156” overall and 1.660” for”tube”.
D
Re: Distributor drive housing dimensions
Posted: Sun Mar 29, 2020 11:47 pm
by iain1967s
Thanks. Looking at photos on eBay, it appears to be B-series for MGB etc.