Page 1 of 1
What thread is for CMZ 204 screws
Posted: Tue Mar 03, 2020 1:01 pm
by roymck
The 2 tiny screws rear hold the door locating cup on the B post under the door catch have rounded off so I will have to drill them and then tap them out again . It’s the cups that locate the doors Nylon locating bush .
The screws are CMZ 204 but I need to know what thread they are to either buy a tap or if someone on here has a tap they could lend out.
Anybody help ? Thanks Roy
Re: What thread is for CMZ 204 screws
Posted: Tue Mar 03, 2020 1:29 pm
by Charlynsane
I think it's 6/32 unc
Re: What thread is for CMZ 204 screws
Posted: Tue Mar 03, 2020 4:38 pm
by roymck
UNC rather than UNF ?
Re: What thread is for CMZ 204 screws
Posted: Tue Mar 03, 2020 4:46 pm
by roymck
Charlynsane wrote: ↑Tue Mar 03, 2020 1:29 pm
I think it's 6/32 unc
Was able to cross reference that and yes your right , thanks very much . Just need to find a tap now .
Roy
Re: What thread is for CMZ 204 screws
Posted: Tue Mar 03, 2020 5:14 pm
by AndyB72
I've found the Somerford website very useful for finding out the spec of various screws/fixings while I've been rebuilding my '63. I get the spec from their site then order them by the handful on Ebay in stainless steel etc.
http://www.somerfordmini.co.uk/eshop/in ... ts_id=2253