Page 1 of 1
Binnacle switch
Posted: Sat Nov 24, 2018 2:22 pm
by Aginley
Hi, what type of switch do I need for under the binnacle and also what wiring or type of bulb holders are needed to lite the speedo up?
Just received my binnacle from nippy cars and carnt tell you how good they are! Amazing reproduction quality. Top marks..
Re: Binnacle switch
Posted: Thu Dec 13, 2018 8:14 pm
by Aginley
Anyone got a picture of the correct switch?
Thanks
Re: Binnacle switch
Posted: Thu Dec 13, 2018 10:43 pm
by steve1071
Autosparks do the metal clip in bulb holders if you want new or I will have some kicking about.
eBay item 123522975584 shows a switch.
Re: Binnacle switch
Posted: Fri Dec 14, 2018 12:59 pm
by steve1071
Re: Binnacle switch
Posted: Fri Dec 14, 2018 1:25 pm
by Aginley
‘Thanks Steve !
Re: Binnacle switch
Posted: Sat Dec 15, 2018 5:33 am
by johnv
Let me know if you find a source, thanks
Re: Binnacle switch
Posted: Sat Dec 15, 2018 12:15 pm
by 111Robin
viewtopic.php?f=5&t=22964&hilit=Switch&start=10
Lucas part number 5L31. Also used on the ADO16 and probably other BMC models.
Re: Binnacle switch
Posted: Sat Dec 15, 2018 5:55 pm
by Aginley
Found something the same from somerford
Re: Binnacle switch
Posted: Sat Dec 15, 2018 6:18 pm
by iain1967s
Early single dial speedo has a square toggle each side - they are hard to find now. My Mk1 S oval dash has a more rounded toggle. Whereas BCA4312 is a flat toggle, more like the windscreen wiper switch.
I think, from left to right, the part numbers are: 13H303, 5L31, BCA4312