Page 1 of 1
heater switch
Posted: Sun Mar 20, 2011 6:41 am
by mattyguk1
hi all, what type of switch should i have on my 1962 mk1 to control the heater/blowers? at the moment its fitted with a standard flick switch that has three settings but the two on settings make no difference to the blower speed, should i have a single on off switch or a pull knob switch? thanks in advance
Re: heater switch
Posted: Sun Mar 20, 2011 2:42 pm
by mk1
if the switch is on the dash it should be a rheostat switch that you turn to activate, if its on the bottom of the fresh air heater it should be a small toggle switch with a chrome dolly.
Re: heater switch
Posted: Sun Mar 20, 2011 4:42 pm
by mattyguk1
cheers mk1,its on one end of dash switch panel so i guess i need to start looking for a rheostat switch!
Re: heater switch
Posted: Mon Mar 21, 2011 8:21 am
by mk1
I'll have a rummage.
I am sure I have one somewhere.