Page 1 of 5
Project Lunchbox.... The Minus
Posted: Sun Jul 04, 2010 10:09 pm
by tedmcedd
Well, I continue!
Part1:
http://www.serifwebresources.com/phpBB2 ... mid=250646
and on we go!
ive been spending!
bought some cibie headlights off eBay... they look brand new!
Look at how domed they are!! they look ace!!!
been shopping at minispares too:
Hi-Los and knuckle joints, Gaz lowered dampers for each corner, solid front subby mounts, braided one piece clutch hose, and a double skin fibreglass mk1 bootlid (not pictured! lols!)
i also took the 1100 and the subby out the bean, putting the 998 auto and subby back in... he then went into my grans barn to sleep until i have money/time to fix him... made me sad
didnt get any of the actual swap... lols! never mind!!
more soon! im really hoping i get paint on him soon... the chap who is letting me use his booth hasnt had an opening... getting lots of jobs! lol
Ed
Re: Project Lunchbox.... The Minus
Posted: Sun Jul 04, 2010 11:07 pm
by chris-pilling
ted, is your minus not on a solid earlyer type front subframe?
Re: Project Lunchbox.... The Minus
Posted: Mon Jul 05, 2010 8:06 pm
by tedmcedd
Its not, its the later single bolt frame....
NEWS!
look at my seats!!!
I got the passenger re-trimmed and cleaned up the drivers side, with some auto glym vinyl care! love them to bits!! only differance is the heat pressed stripes on the original and the stitched stripes on the re-trimmed seat, but they both shine like diamonds after that auto glym treatment, id recomend it to anyone!
Re: Project Lunchbox.... The Minus
Posted: Thu Jul 08, 2010 9:33 pm
by tedmcedd
well i got my rear subframe and selection of bits and bobs back from the shot blasters, gave the subby a lick of the old Hammerite...
couple of pictures:
also been woking on other things, but more on that when they are done...
Ed
Re: Project Lunchbox.... The Minus
Posted: Thu Jul 08, 2010 9:40 pm
by GraemeC
Those handbrake quadrant pins look like they seen a bit of action and wear!
Re: Project Lunchbox.... The Minus
Posted: Sun Jul 11, 2010 3:48 pm
by tedmcedd
GraemeC wrote:Those handbrake quadrant pins look like they seen a bit of action and wear!
yer... i think ill need some new ones... lol!
Re: Project Lunchbox.... The Minus
Posted: Mon Jul 12, 2010 7:33 pm
by tedmcedd
well, number one of two 'ill show you when its finished' is ready for showing!
I needed a Boss for my Formula/speedwell wheel, Lets see what I have in the shed...
An Old mountney boss was taken to work and i set to it on the very old skool lathe
off came the dished part
then onto the milling machine left me with this:
lovely! Just have to drill and tap for some wee bolts and get a crackle black finish!
more soon!
Ed
Re: Project Lunchbox.... The Minus
Posted: Mon Jul 12, 2010 10:06 pm
by newtune
Well done ! What a good idea ! That will look grand
James
Re: Project Lunchbox.... The Minus
Posted: Tue Jul 20, 2010 12:03 am
by tedmcedd
well, been doing a bit more finishing on the old wheel arches...
they were all scappy on the edge where I'd cut them badly and they had not been evenly laid with fibreglass, so i bought some U channel strips to finish them off...
I used Tiger bond to make sure they stayed put, gonna finish blending them in tomorrow, then paint time!!
Oh....
Look!!
Wheel Pics:
Ed
Re: Project Lunchbox.... The Minus
Posted: Tue Jul 20, 2010 12:52 pm
by medwaybeat
I didn’t know Heineken made paint.
Looking good
Re: Project Lunchbox.... The Minus
Posted: Tue Jul 20, 2010 8:10 pm
by tedmcedd
finished off the arches today...
a few pics for you!
oh, PS. Primer booked for thurs/fri!!!
Ed
Re: Project Lunchbox.... The Minus
Posted: Tue Jul 20, 2010 9:28 pm
by cookie1071
Liking this thread
and keen to see the end result - what colour is it gonna be?
Re: Project Lunchbox.... The Minus
Posted: Tue Jul 20, 2010 10:03 pm
by chris-pilling
cookie1071 wrote:Liking this thread
and keen to see the end result - what colour is it gonna be?
willow green i think
Re: Project Lunchbox.... The Minus
Posted: Wed Jul 21, 2010 8:58 pm
by tedmcedd
yep willow green!
day off work on friday for primer time!
Re: Project Lunchbox.... The Minus
Posted: Fri Jul 23, 2010 3:48 pm
by tedmcedd
Re: Project Lunchbox.... The Minus
Posted: Fri Jul 23, 2010 3:53 pm
by guru_1071
loos good ed
did you contact that guy about those neat grp doors??
Re: Project Lunchbox.... The Minus
Posted: Fri Jul 23, 2010 3:58 pm
by tedmcedd
yer i did, he works for arc angels, so he borrowed the moulds... said he couldnt make me any
sent me the link to the ones they make... £360 pair... no thanks... lol
Re: Project Lunchbox.... The Minus
Posted: Fri Jul 23, 2010 4:45 pm
by guru_1071
tedmcedd wrote:yer i did, he works for arc angels, so he borrowed the moulds... said he couldnt make me any
sent me the link to the ones they make... £360 pair... no thanks... lol
ha! - so basically he went on retro rides and claimed he had made the moulds himself for his own car (and took all the glory for doing them!!!) , cheeky begger! - what a con - RUMBLED!
Re: Project Lunchbox.... The Minus
Posted: Fri Jul 23, 2010 5:08 pm
by tedmcedd
indeed! if it were me i would of made another pair for someone... no one had to know... it was a private email after all!
Re: Project Lunchbox.... The Minus
Posted: Sat Jul 24, 2010 8:21 am
by chris-pilling
ted, i bought a set of grp doors for my brother minus of a lad of the mini forum, think he called himself stig... £200 they were, they needed finishing quite a bit though and wernt fantastic in my opinion, but they were a lot lighter and better in that respect because of that. i'l try find out some details. do you think its the same chap that guru mentioned?
