Page 1 of 1
Mk1 quarterlights - replacement screw
Posted: Sun Sep 20, 2015 8:41 pm
by thefarmer
I spent yesterday cracking my quarterlights on my mk1 to swap out the manky perspex. By some miracle I have managed to salvage all the screws except for one. Any suggestions on where to get a replacement or to make a suitable one out of something else (blue peter style)?
Thnx
Ben
Re: Mk1 quarterlights - replacement screw
Posted: Sun Sep 20, 2015 9:58 pm
by 1071bob
If you mean the small c/sunk screws which hold the frame together, they are CMZ 0204 or 6-32 unc x1/4". Stig fasteners do a stainless steel version.
http://www.a2stainless.co.uk/6-32-UNC-x ... .aspx?nh=1
Re: Mk1 quarterlights - replacement screw
Posted: Mon Sep 21, 2015 2:02 pm
by thefarmer
thanks for that...I'll give them a go.
Ben
Re: Mk1 quarterlights - replacement screw
Posted: Tue Sep 29, 2015 6:48 pm
by 5portsrock
Re: Mk1 quarterlights - replacement screw
Posted: Wed Sep 30, 2015 9:43 am
by gs.davies
Is the lug that joins the frame to the hinge also available? A couple of mine have rusted and broken.
Re: Mk1 quarterlights - replacement screw
Posted: Sat Oct 03, 2015 8:20 pm
by Macker2
If you mean these they are quite easy to make. I replaced using screws and tapped holes instead of the two rivets. I had to grind the back of the screws flush.
Macker
Re: Mk1 quarterlights - replacement screw
Posted: Wed Oct 07, 2015 5:16 pm
by Hipwell
I've got two or three original chrome screws if OP or if anyone needs.