mk1-forum.net

Posted: **Wed Sep 09, 2015 8:41 pm**

Any wise owls out there know if the wiring loom for a Mk2 Cooper should this be cotton braid or black PVC? Cheers. Mark

Posted: **Thu Sep 10, 2015 9:51 am**

Both are possible, but plastic wrapped is by far the most common.

M

Posted: **Thu Sep 10, 2015 1:36 pm**

Thanks Mark

Posted: **Thu Sep 10, 2015 2:21 pm**

Interestingly enough my mk2 was half and half. The front was black plastic and the rear loom braided cloth. Pretty certain that was from the factory

Posted: **Thu Sep 10, 2015 2:50 pm**

The braided rear 1/2 seems to have gone on MUCH longer than the front.

M

Posted: **Thu Sep 10, 2015 3:43 pm**

Ditto that Dr S hence my question. Cheers

Posted: **Thu Sep 10, 2015 5:57 pm**

Mine is also half and half as well

Posted: **Thu Sep 10, 2015 7:52 pm**

My Dec 68 S has PVC front and braided rear.

Posted: **Thu Sep 10, 2015 7:55 pm**

So does my April 68 Mk2 998.

Posted: **Thu Sep 10, 2015 11:58 pm**

1970 Mk 3 S's still had braided rear looms.

Mk2 Cooper wiring loom?