mk1-forum.net

Hello! I have remote-box and assume to install the classic reverse gear lock for that!
If you please look at the picture, you can see that I already have install a brake proportioning valve.
Now I wonder if it is enough space to install the gear lock!?

I would say no - the handle would probably hit your valve

the lift up cable type would solve your problem, but they are not a easy job to fit and set up

Thanks for your reply! It’s a easy operation to get more space to the right for the valve, and the reverse lock!

I’ll solved the reverse gear lock! It was space enough, so I replicated one from another!


Done! Before paint: