Page 1 of 1
Dynamo issues
Posted: Thu Jun 11, 2015 2:46 pm
by coopertim
Afternoon all. I'm having a few issues at the moment with DPU's ignition system. Would I be able to replace the 850 dynamo with the spare 1275 unit I have? Secondly, on the voltage regulator, is the middle back spade connector empty or does it have the smaller yellow wire attached? I don't want it to have a melt down or worse!
Cheers
Tim
Re: Dynamo issues
Posted: Thu Jun 11, 2015 3:00 pm
by mk1
The 850 & 1275 Dynamos are the same. Not sure re wiring as I don't have a reference to hand at work.
Full wiring diagram here.
http://mk1-performance-conversions.co.u ... l_1968.pdf
M
Re: Dynamo issues
Posted: Sun Jun 14, 2015 12:30 am
by Rich997
Really?
How do standard mk1 850 and other Lucas C40 applications differ?
Re: Dynamo issues
Posted: Mon Jun 15, 2015 8:43 am
by mk1
They don't, that's what I said. the Dynomos are identical.
M
Re: Dynamo issues
Posted: Mon Jun 15, 2015 3:50 pm
by snoopy64
Hi
I can recommend the electronic regulator conversion...
http://www.dynamoregulatorconversions.com/