mk1-forum.net

hello guys, please can someone jog my my memory as to pointers for identifying a proper rear subframe, am i right in remembering the captive nuts for the radius arms should be hex not round for example, have a few to go at but they all different , had problems before and dont want them again many thanks

A proper or genuine if you mean that , has a mowog logo reverse pressed into the subframe ... Ken

thanks ken, do the original ones have the indent pressing on the btm web also ?

Maybe it was the Aust Production? but our subframes had square nuts welded in fro the radius arm brackets and didn't have mowog pressed in to them but were stamped.

square nuts welded in fro the radius arm brackets and didn't have mowog pressed in to them but were stamped.

that is what I have, it looks to be thicker material and the radius arm mounts line up with the brackets, it isn't stamped mowog though, still think its a better option than another couple I have that have no pressings and the mounts are not as in line as the other, thanks spider, am going to go with what I thought was the nearest to a mowog frame as I remember

Knickers - Love it !!!

pad4 wrote:Knickers - Love it !!!

I bet you where a subscriber........

rich@minispares.com wrote:

pad4 wrote:Knickers - Love it !!!

I bet you where a subscriber........

Where can I subscribe?

I bet you where a subscriber........

i still am