Page 1 of 1
Mk2 cooper inner wing
Posted: Mon Mar 09, 2015 9:22 pm
by Callum
Altering the heritage inner wing back to original but unsure what these holes are for? Any help much appreciated
Re: Mk2 cooper inner wing
Posted: Wed Mar 11, 2015 7:52 pm
by Simon776
The top two sets of holes are for the inner wing mounted blower unit and should be there on a Mk 2.
The small one below is for the retaining clip for the air intake and should be there on a Mk 2
The bottom two small ones are for the solenoid on the Mk 3 onwards and shouldn't be there on a Mk 2 unless your car is a really late one.
Re: Mk2 cooper inner wing
Posted: Thu Mar 12, 2015 8:33 am
by Callum
Thanks very much that's very helpful. Any idea on the one closest to the front panel?
Re: Mk2 cooper inner wing
Posted: Thu Mar 12, 2015 9:10 am
by IAIN
have you removed the bonnet prop catch ?
Re: Mk2 cooper inner wing
Posted: Thu Mar 12, 2015 4:58 pm
by Spitz
I can confirm those holes are for the blower motor......just removed the blower from my 61 last night
Re: Mk2 cooper inner wing
Posted: Thu Mar 12, 2015 7:59 pm
by Callum
IAIN wrote:have you removed the bonnet prop catch ?
I haven't removed it just not welded the new one back on yet
Re: Mk2 cooper inner wing
Posted: Thu Mar 19, 2015 8:01 pm
by Nick W
Images are of a nos bmc inner wing
There are some differences to yours ,
Below the 2 square holes for the regulator there
Is one the same below . Don't know what it's for though?
