Page 1 of 1
A post repair
Posted: Sat Mar 07, 2015 9:04 pm
by tedmcedd
I've started my mk2!
The Drivers A-pillar is non existent.... The Passenger is sorta there, but has been hacked about... Has anyone got some pictures of how this is assembled!? The inner A-panel, I'm guessing doesnt weld to this panel:
Does the inner wing weld to that, then the Inner A to the inner wing??
Thanks
Ed
Re: A post repair
Posted: Sat Mar 07, 2015 9:47 pm
by Dr.Mabo
How the A-pillar is assembled you can see on the pics in my restoration thread
viewtopic.php?f=6&t=11377&start=20
Just scroll down. I hope this answers some of your questions.
No, the illustrated panel is welded to the outer A-panel. The inner wing is welded to the inner A-panel. Then inner and outer A-panels are welded at the seam.
so long
The Doc
Re: A post repair
Posted: Sat Mar 07, 2015 9:57 pm
by swifty
These are from my resto of a mk1 . May help .... Ken
Re: A post repair
Posted: Sat Mar 07, 2015 11:45 pm
by tedmcedd
Thanks guys!
Perfect!
Re: A post repair
Posted: Sun Mar 08, 2015 9:48 am
by gs.davies
There's a few pictures of my a post in pieces on my thread, page four I think
viewtopic.php?f=6&t=6462&start=30
Re: A post repair
Posted: Sun Mar 08, 2015 2:05 pm
by InimiaD
The rear leading edge of the inner wing on my traveller was welded to the panel shown in your pic Ted.
I double checked on my MK 2 S and that has the tell tale spot welds showing through under the paint.
You can see the row of spot welds in this thread, hopefully.
viewtopic.php?f=6&t=1491&start=40