Page 1 of 1
Lower (floor, under door opening)) seatbelt mount
Posted: Mon Jan 26, 2015 3:17 pm
by davidmuir
Hi, Should the outer floor mount for a 3 point seatbelt swivel or should it be bolted up 'solid' in the correct orientation i.e. at about 45 degrees?
thanks
Re: Lower (floor, under door opening)) seatbelt mount
Posted: Mon Jan 26, 2015 5:44 pm
by Dr S
Unless the bolt has an unthreaded part of the shank I think I'd be taking it down to fully bottomed out, e.g. Nipped up tight
Re: Lower (floor, under door opening)) seatbelt mount
Posted: Mon Jan 26, 2015 8:07 pm
by Simon776
It should swivel - there is a spacer that should be in there to allow that.